phone Phone
+622152392835
menu

PT CRYSTAL CLEAR CHEMICALS

sql
FLO KING BX-1200 FILTER SISTEM
FLO KING BX-1200 FILTER SISTEM
FLO KING BX-1200 FILTER SISTEM
FLO KING BX-1200 FILTER SISTEM
FLO KING BX-1200 FILTER SISTEM
Hover to Zoom

Jual FLO KING BX-1200 FILTER SISTEM



Spesifikasi FLO KING BX-1200 FILTER SISTEM

FLO KING BX1200 Filter System


The FLO KING BX1200 provides a maximum flow rate of 1200 gallons (4500 liters) per hour. Use it stationary on one tank or move it from tank to tank. Multiple body lengths (4, 6, 8, 10, 12, and 14 inch) enable use of the BX1200 in tanks with varying solution levels and depths.
   The BX1200 comes complete, preassembled, ready to operate and includes the items shown in the labeled photo below. For best results in most metal-finishing solutions, use the BX1200 with our Permacore Magnum Reusable or Poly-Spun Disposable filter cartridges in the appropriate length.

BX1200 Specifications
Pump: Available in CPVC, polypropylene, PVDF (Kynar), and stainless steel as pump materials of construction. Standard shaft is 303 stainless steel covered with Teflon heat-shrink tubing. As a precaution for aggressive solutions that may attack SS, a titanium shaft is available for pump-body lengths of 6, 8, 10, & 12 inches and a Hastelloy-C276-alloy shaft is available for pump-body lengths of 6, 8, 10, 12 & 14 inches.
Flow Rate: 1200 gallons (4500 liters) per hour at 60 Hz. A flow-rate reduction of about 18% is typical when operating at 50 Hz.
Pressure: 12 feet (3.6 meters) of head pressure.
Weight: About 10 pounds (4.5 kg) in CPVC, depending on pump- body length
Motor: Epoxy coated, 1/12th hp (60 watt), single phase, 3000 RPM, TEFC, thermally protected. Electrical cord is 10 feet (3 meters) long. When ordering, specify one of the following motors:
(1) 115 volt, 60 Hz, 2.3 A
(2) 230 volt, 50/60 Hz, 1.3 A

BX1200 Pump-Body Length
All Flo King pumps are manufactured in different pump-body lengths to accommodate the freeboard (distance from top of tank to solution surface) and, in many cases, tank depth. To ensure priming and proper operation, solution must be 1 inch (2.5 cm) or more above the Weep Hole on the BX1200 pump body. The Impeller is located just beneath the Weep Hole and must be submerged in solution for the pump to operate.


Specify length of pump body when ordering. If you are not sure which length is required, supply all of the information requested at this link and we will recommend a system.

 

Untuk keterangan lebih lanjut, silahkan download PDF ini :